Double-Lock Standing Seam
A well known and traditional technique that has become an international standard. Suitable for low-pitched roofs down to 3 degrees, which makes it ideal for harsh climates with snowfall, strong winds and heavy rains.It offers maximum design flexibility, straight or curved, radial or arched. Its high upstand gives your roof elegant depth and shading. It is uniquely designed to account for thermal movement and provide excellent weather tightness.
Pitch: > 3° Width 305mm-610mm
Seam Height: 25mm or 38mm
Standard 610mm coil forms a 515mm wide tray centre to centre
Material: Copper, Zinc, Aluminium

 


Single-Lock Standing Seam
The taut and regular appearance of this profile sheds more emphasis on the seam. It has a broader effect than the double-lock giving large surface areas a lively and striking appearance.The sharp lines, depth and shading make it especially suitable for cladding and visible areas of steeply inclined roofs.
Pitch: > 3°* Width 305mm-610mm
Seam Height: 25 or 38mm
Standard 610mm coil forms a 515mm wide tray center to center
Materials: Copper, Zinc, Aluminium, Prepainted SteeL
*Subject to specific design


Batten Cap
The oldest of roof covering systems. Its bold conspicuous contours give this profile a unique urban character. The highly structured effect of the longitudinal joints leads to charming light and shade variations as the angle of light changes. This profile allows easy dismantling for any roof penetrations, maintenance and repair.
Pitch: > 5° Width 305mm-645mm
Seam Height: 38mm
Standard 610mm coil forms a 550mm wide tray center to center
Materials: Copper, Zinc, Aluminium, Prepainted Steel


Batten Seam
A similar look to the Batten Cap, but with a hand seamed finish. Again the bold dramatic lines give great depth and shading, but with a significantly more open, clean, handcrafted appearance. Both the Cap profiles can be used in combination with the standing seam for even greater variation
Pitch: > 5° Width 305mm-645mm
Seam Height: 38mm
Standard 610mm coil forms a 550mm wide tray center to center
Materials: Copper, Zinc, Aluminium, Prepainted Steel


23.5mm Snaplock
The highly adaptive profile has subtle lines but still gives great form and texture. No clips or caps make installation easy. The Snaplock system is designed to seat firmly, stay snug and to channel moisture away keeping the roof weathertight. This system is ideal for curved roofing applications, either concave or convex
Pitch: > 8° Width 305mm or 408mm
Seam Height: 23.5mm
Materials: Copper, Zinc, Aluminium, Prepainted Steel


Standing Seam Snap-Lock

This versatile profile adds interest, shadow and depth together with beautiful soft lines. Easy to install, no special tools are required, and it can be used with either a plywood backing or open purlin applications. Reduced structural requirements and reduced installation times make this system very cost effective.
Pitch: > 3°* +  Width 305mm –  558mm.
Seam Height: 25mm and 38mm
Materials: Aluminium, Prepainted Steel
*Subject to specific design